Dual Adjustable Set Point Pressure Control Valve , Pressure Safety Valve

Water Pressure Management Valve Dual Adjustable Set Point Pressure Based On Time Ductile Iron EPOXY Coated



Description:

In city with DMA management, water company can use Pressure Management Valve to control the pressure of each single isolated DMA and decrease the leakage that no need to swap the broken pipes. In such case, water authority can decrease the leakage rate and NRW - Non Revenue Water issue.

P26M provide two adjustable pressure reducing pilots, one set to low pressure, the other to high pressure. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating relatively steady as the pilot set points. The high pressure pilot can be isolated by means of a battery operated latching solenoid. This solenoid is controlled using a fully programmable controlled which is user set to give higher and lower pressure based on time.

Feature:

• Multiple time selection possible (Max 6)
• Reduces system pressure when not needed (low flow demand or night time), supplies increased pressure when required (high flow demand or day time)
• Pressure Reducing Valve with two set points, high pressure and low pressure

Service Fields:

For water system, irrigation system.

Technical Data:
Size Range: DN50~DN800mm
Pressure Ratings: 1.0Mpa; 1.6Mpa; 2.5Mpa
Working Temperature:-10°C- 80°C Suitable
Media: Water
End connection: PN 10 / PN 16 / PN 25
Consult Factory for other applications
IP68 for water resistance
Comply with BS EN 1074-5, ISO 5208, BS
EN 12266-1, BS EN 558-1

Series Description:

Materials And Dimensions DN50-DN350

Materials And Dimensions DN400-DN800

pressure control valve

time control valve

Dual Adjustable Set Point Pressure Control Valve , Pressure Safety Valve Images